- Chemical Auxiliary Agent[6]
- Chloride[2]
- Polymer[1]
- Pharmaceutical[1]
- Contact Person : Mr. Yang Sid
- Company Name : Watercare Chemicals Yixing Co., Ltd.
- Tel : 86-527-84820023
- Fax : 86-527-84820128
- Address : Jiangsu,Su Qian,Economic Development Zone,Yangtze Road 38 North
- Country/Region : China
- Zip : 223800
PAC for water treatment (Three manufacturing plants)
Related Product Searches:PAC for water treatment (Three manufacturing plants),High Quality,PAC, water treatment,PAC-WWD
PAC for water treatment (Three big fatories supply)
Polyaluminum Chloride
PAC
Product name Poly aluminum Chloride (PAC)
Product code PAC-WWD
Application Water treatment, Waste Water Grade
CAS No. 1327-41-9
PAC-WWD is a new-type inorganic macromolecule coagulant with high efficiency, manufactured by advanced process. It is drum dried in solid form widely used for treating various industrial effluents and municipal waste water.
PAC-WWD is high basicity (85-92%) polyaluminum Chloride. Its high basicity and the low dosage minimize the need of pH- adjustment and small coagulant dose reduces the amount of sludge. It is pretty effectively to treat the low-temperature raw water.
Properties
The water treatment cost is 20%-40% lower than that of other inorganic coagulants.
It can lead to quick formation of flock with big size and rapid precipitation.
It has wide-range adaptability to the waters at different temperatures and a good solubility.
The dissolved liquid of PAC-WWD is slightly corrosive and suitable for the automatic dosing and convenient for operation.
Specifications
Index | Specification |
Appearance | Yellow granule |
Al2O3 (%) | ≥ 28 |
Basicity (%) | 85~92 |
Insoluble (%) | ≤ 1.5 |
Iron content (%) | ≤ 5 |
As (%) | ≤ 0.0015 |
Pb (%) | ≤ 0.006 |
pH(1% water solution) | 3.5~5.0 |
Notes The mass fractions of NH3-N, As, Pb, Cd, Hg and Cr6+ are calculated based on that of Al2O3 as 10.0%.
Application & Notes
Before dosing the solid product shall be diluted to 5-10% Al2O3 liquid.
The dosage of the liquid product is 1-100ppm depending on the raw water quality. The specific dosage is based on the flocculation test and site trial.
The product can not be stored with other chemicals.
The solid product is packed in inner plastic bags and further in polypropylene woven bags, with each bag containing 25 Kg.
The shelf life is 6 months for diluted liquid product and 12 months for the solid product. The product should be stored in a dry and ventilated place, but the effect will not be affected even if it gets wet.
PAC for water treatment (Three manufacturing plants)
